Skip to content

Replacement kitchen doors: a complete buying guide

Replacing the doors is the cheapest honest way to change a kitchen. The carcasses stay where they are, the plumbing and electrics are untouched, and the room that comes back looks new. This guide covers what you are actually buying, how to work out whether your kitchen suits it, and what to settle before you order.

What a replacement door order is

It is every door and every drawer front in the room, measured one at a time. Kitchens are rarely as regular as they look. Two base units that appear identical can differ by a few millimetres, and a door ordered to the wrong size by three millimetres will not sit right.

Most orders also include at least one of the following, so it is worth deciding early rather than halfway through fitting:

  • End panels, to cover the exposed side of a run or an island
  • Plinth, the board that runs along the floor under the units
  • Cornice and pelmet, the trims above and below wall units
  • Handles, unless you are reusing the ones you have
  • Hinges, if yours are tired or if the new doors need a different type

Will your kitchen take new doors?

Three things decide it, and all three are about the carcasses rather than the doors.

The carcasses have to be sound

Open a base unit and look at the bottom and the back. Chipboard that has swollen under a leaking sink, shelves that sag, or a unit that moves when you pull on it, none of those are fixed by a new front. If more than one or two units are in that state, the sums start to favour a new kitchen.

The layout has to be one you can live with

New doors change how a kitchen looks, not where anything is. If the problem is that the oven is in the wrong place or there is nowhere to stand while someone opens the fridge, doors will not solve it.

The hinge type has to be workable

Almost every kitchen built in the last thirty years uses concealed hinges sitting in a 35mm bored hole. If yours are those, you are in the normal case. If you have exposed hinges, or an older frame built kitchen, the job is less straightforward and worth a conversation before you order anything.

Working out what it will cost

Doors are priced individually and the size matters, so the only way to get a real figure is to count your doors and drawers, note their sizes, and price them. A typical mid sized kitchen runs to somewhere between fifteen and twenty five fronts once the drawers are counted, which surprises most people the first time they count.

Across our own ranges the entry point is around 12 pounds for a smaller door and the solid ash ranges start around 35 pounds. The kitchen doors page groups every range into best value, mid range and premium so you can see where each one sits before opening it.

There is a fuller breakdown in what replacement kitchen doors cost.

Choosing a style

There are five door shapes and every range we carry is one of them: shaker, slab, slab with a routerline, handleless, and J-pull. Which one you want is mostly a question of how much detail you want in the room and how you feel about handles. Kitchen door styles explained goes through each one.

Colour is the harder decision, because a colour on a screen is not a colour in your kitchen. North facing rooms pull everything cooler and greyer. Warm bulbs push creams yellow. Hold a sample against your own cabinets, in your own light, at the time of day you use the room most.

Measuring

Measure the doors themselves, not the gaps between them. The gap is a consequence of the door size and the hinge adjustment, and measuring it gives you a number that is nearly right and therefore worse than useless.

Full method in how to measure kitchen cupboard doors.

What to settle before you order

  • Every door and drawer counted, measured and written down
  • Which way each door opens, and which pairs open together
  • Whether you are reusing your hinges or replacing them
  • Whether the handle positions on your old doors matter to you
  • What you are doing about end panels, plinth and trims
  • Where you will store the old doors until the job is finished

Frequently asked questions

Can I replace just a few doors?

Yes, and people do it after damage or a change of plan. The thing to be aware of is that a door made now will not be an exact match for one made five years ago, even in the same range and colour. Finishes are reformulated and batches vary. If an exact match matters, a sample is the only way to know.

Do new doors come with hinge holes?

It depends on the range and on how the door is supplied. Ring us on 01206 616626 with the range you are looking at and we will tell you exactly what you will get.

How long does fitting take?

Swapping a door onto existing hinges is a few minutes a door once you have the hang of it. A full kitchen is comfortably a weekend for someone competent, longer if you are also fitting new hinges or handles. The slow part is adjusting everything so the gaps are even, and that is worth not rushing.

What if I measure something wrong?

Doors are made to the sizes you give, so a wrong measurement is a wrong door. Measure everything twice, write it down as you go rather than remembering it, and if any unit looks unusual, measure it a third time.